Holley EFI CANbus + GPS datalog

This is a future project that will probably start during the summer of 2016. This is when I spend plenty of time on the boat and can test the hardware and software out. I usually already have my laptop with me as it is to check the EFI system and ...

more ...

Measuring bar velocity with encoder

I started this project some time ago when there was a lot of hype over what there is to gain from measuring bar speed during the lifts. The term is VBT (velocity based training) and there is a lot of research out there about these. There is the Tendo unit ...

more ...

Logging GPS speed with Holley EFI

This all started with wanting to log everything. I wanted a way to log prop slip or atleast calculate it from the datalog. So the problem with a boat is getting accruate speed data. You need speed to calculate the prop slip. GPS is the only way to get it ...

more ...

Conversion to Holley EFI

I got tired of trying to get the carbs to always run right so I decided to upgreade to EFI. I will never go back and anything in the future will have to have EFI.

During the upgrade there were a lot of parts I needed to make. As far ...

more ...

How I ended up with a 1000HP

There is a lot to write about on this build and when I get a chance I will update with pictures on all the problems found with the engine that led up to this rebuild.

But for now, we'll go through the build. I had Gordy at Pfaff Engines ...

more ...

Long travel sand car build

Back when it was a booming business building sand cars I was trying to get on board. That was until the market crash of 2008 and everyone went bankrupt.

I designed the chassis in ProE and built the car off of those. Not sure where the ones went that had ...

more ...

Honda TRX330R build

Overall this thing was badass. When I got it, it was an ugly grey frame and white suspension. Started out as a 250R and I put a CT330 kit on it and NOS. You can see the NOS bottle mounted in the front under the nose. Some other things that ...

more ...

'82 Chevy S10 build

As you can see my desire to build engines and work on things started early. I was around 18 when I rebuilt the engine in my truck. It developed a rod knock so the fun begin.

This of course was before the internet was really used back in '96. The ...

more ...